Rexnord Industries, LLC. ABOUT US | SITE MAP | CONTACT US
HOME
DURALON BEARINGS
TUFLITE BEARINGS
CONTACT US
Application Selection

Straight Sleeve

Flange Bearing

Thrust Washer

Special Configurations		 > > > Thrust Washer Application Form

Rexnord Duralon® Thrust Washer Application Form

 Thrust Washer
 

Contact and General Application Information
 
First Name:
Last Name:
Company:
Address:
City:
State:
Zip Code:
Phone:
Fax:
Email:
Type of Application:
New
Existing
Modify existing design
 
 
Provide a brief description of your application:
 

Dimensional Information
 
Bearing Units:
Imperial
Metric
Thrust Washer
B
in.
D
in.
T
in.
 
Please note any special tolerance requirements, dimensional needs, or bearing configurations:
 
 

Load, Motion and Speed Information
 
How much thrust load will be applied?
Static Load:
lbs.
Dynamic Load:
lbs.
 
What is the relative motion between the contact surface and the bearing?
 
Oscillatory/Pivot
Angle of Oscillation (°):  
Oscillatory Cycle Time (cycles/min.):  
 
 
Full rotation
Rotational Thrust Washer Speed (RPM):  
 
Where is the relative motion with respect to the bearing? One Face Both Faces
 
Please include any special comments about the loads, speeds, or motion:
 

Environmental Conditions
 
Temperature
 
Temperature Units:
° F ° C
 
Continuous:
° F
Maximum:
° F
Minimum:
° F
Exposure Time (min.)
 
At continuous temp:
At maximum temp:
At minimum temp:
 
List any chemicals the bearing may be in contact with:
 
List any contaminants the bearing may be exposed to (sand, dirt, etc.):
 
Please include any special comments about the environmental conditions:
 
 
Information Request | Technical Reference | Products | Application Analysis | About Us | Site Map | Contact Us | Rexnord.com

© Copyright 1995 - 2012 Rexnord Industries, LLC.
All Rights Reserved.

Site Design by